• Pressure operated valves
• Dust collector valves
• Process valve automation
• Fuel, gas & oil valves
• Proportional valves
• Miniature valves
• Fieldbus electronics & I/O

Pneumatic Valves

• ISO valves
• Poppet valves
• Subbase valves
• Directional control valves
• Line mounted valves
• Proportional valves

Air Preparation

• Filter
• Regulator
• Lubricator
• FRL’s
• Lockout & shut off valves

Cylinders and Actuators

• Round cylinder
• Compact cylinder
• ISO standard cylinders
• CNOMO cylinders
• Rodless, slide & rotary cylinders
• Cylinder accessories

Technical precision in the smallest format-the FZ is our solution to all applications where the low volumes have to be pumped pulsation-free. It offers a linear characteristic, extremely low running noise and minimum power consumption.
Pump performance up to 60 mbar/0.85 psi pressure, 60 mbar/1.75 inHg vacuum and 0.71/ min of free flow.

An almost linear characteristic is a distinguishing feature of our rotary diaphragm pumps. Unproblematic gases reconveyed at minimum noise level. Its performance characteristic predestines them for blood pressure measuring instruments.
Pumps performance up to 1bar/14.5 psi pressure and 2.1 l/min.

Eccenter Diaphragm Pump 700

Diaphragm pumps for medium pressure and suction power-offering high chemical and heat resistance. Your ideal choice for autoclaves, lab and medical appliances.
Performance range from 6 to 34 l/min free flow, up to 960 mbar/ 28 inHg vacuum and 2.5 bar/ 36 psi pressure.

Vibrating Diaphragm Pump

Our proven SA series-reliable and robust. We develop these models as a problem solution for all applications where and uncomplicated pump with extremely long life for the slight pressure differences is required.
Pump performance up to 300 mbar/9.0 inHg vacuum, 0.3bar/4.5 psi pressure and 10 l/min of free flow.

Linear Diaphragm Pump

The patented linear drive has made it possible to manufacture diaphragm pumps of the LI series, which are among the most powerful and efficient systems for pumping high volumes. These models are characterised by extremely long service life.
Pump performance up to 750 mbar/22 inHg vacuum, 1.6 bar / 23 psi pressure and 50 l / min of free flow.

Liquid Diaphragm Pump

These self-priming pumps are suitable for pumping or circulating the widest variety of liquid. Our modular design system caters for customer-specific performance requirements.

The rugged and reliable Hibon Peformer Series (models 60, 100, 200, 350 ,450) provides a wide range of efficient low pressure solutions for the most critical applications. Offering state-of-the-art impeller, seal and oiler design, Hibon leads the industry in efficiency and maintenance free operation.

Process Blowers

The Hibon process blowers are world renown and benefi t from more than a century’s experience, making them particularyreliable and rugged for use in chemical, parachemical, nuclear, gas, enery and other process industries. Continousresearch and development of the Hibon product range has led to the introduction of new process bare shaft blower ranges:NX S, series and NX.P Series.

S2H Blowers

The Hibon S2H range of positive displacement blowers is designed for use in blower and vacuum applications. Suitable for handling air and inert gases, these blowers provide market typical footprint for easy exchange.

TRVX

Monostage liquid ring vacuum pumps for high, medium and high vacuum. Capacity to 1060 m/h. Max vacuum 33 mbar.

TCA

Monostage centrifugal pumps with completely open impleller. Capacity to 100 m/h. max pressure 10 bar.

TBA

Self-priming centrifugal pumps with low NPSH. Capacity to 35m/h. max pressure 35 bar.

TRH

Double stage liquid ring vacuum pumps. Capacity to 3500 m/h. max vacuum 33 mbar.

TRV

Single stage liquid ring vacuum pumps. Capacity to 500m3/h. max vacuum 33mbar.

Others

Oilsys: closed-loop oil sealed vacuum units.

Hydrosys: Centralised package vacuum units with total or partial water circulation.

Hydropack: Compact package vacuum units with total or partial water circulation.

The Unozawa “ARJ” Positive Displacement Blower is new series Roots blower developed by incorporating extensive experience and technical experience. This series blower type “ARJ” employs three lobe rotor, featuring higher performance, lower noise and less vibration. When the blower handles special gas, mechanical seal can be provided. High design pressure blowers are available up to 20 barg.

ARK type is small and middle size blower and vacuum pumps employing three robe rotor and featuring lower noise. Products are high quality using all parts produced by high technology and quality assurance system based on ISO 9001.Blower / Vacuum pump are for air service and dry tape in which water or oil are not used at gas contact parts. This products standardised and made to ARK series which enables this series to be manufactured with shorter lead time.

KTS – Small, Air-cooled Dry Vacuum Pumps for Clean Processes

The UNOZAWA Dry Vacuum Pump model “KTS” is multi-stage Roots type can be operated in a completely DRY condition without cooling water. The dry vacuum pump is developed with new concept of strong configuration to handle carry over liquid.

TS – Dry Vacuum Pumps for General Industries

The UNOZAWA Dry Vacuum Pump model “TS” is multi-stage Roots type. The dry vacuum pump has high reliability and efficiency using no lubricating oil or sealing water in the gas passage, thus ensuring the highest of cleanliness. Using together with a mechanical booster, it is easy to obtain larger pumping speed and high vacuum level. This combination pump set with booster and dry vacuum pump is out “TE” series.

TRV – Vertical Dry Vacuum Pumps for Chemical Processes

The UNOZAWA Dry Vacuum Pump model “TRV” is a dry vacuum pump developed with a new concept that is different from conventional dry vacuum pump. The Top-Down transportation of gas ensures rapid and complete draining. The pump insures easy solvent recovery in the discharge port.

TRM – Horizontal Dry Vacuum Pumps for Chemical Processes

The dry vacuum pump is multi-stage Roots type. It is constructed as a three stage horizontal type with intermediate heat exchanger. The vacuum pumps can be operated in a completely dry condition at any suction pressure from ultimate pressure up to atmospheric pressure. The intermediate heat exchanger ensure easy solvent recovery. All the pump components are mounted together on a common frame. The pump capacity is 2 m3/min to 35 m3/min. Through the use of high vacuum mechanical boosters, with the dry vacuum pump, the pumping capacity can be extended as required.

Over the years, we have agency or distributorship for many renowned brand of vacuum pump and as we move on, we started to own our house brand for few range of oil-less piston vacuum pump and compressor, oil free rotary vane vacuum pump, diaphragm vacuum pump and side channel blower under “Micro-Air”.

Microair Products

MAJP Oil-less Piston Pump

MADA Diaphragm Pump

MAB Side Channel Blower